Are your 55 year old kick panels cracked, warped or just look look like they belong in a junk yard? If so, it time to give your interior the upgrade it deserves! We offer quality reproduction kick panels that are made with 0.125″ ABS plastic with a Crush grain surface to resemble the panels produced by Ford and Mercury in the early 1960’s. The thickness of our panels not only increases the strength, it also resists the panels from buckling once the fasteners are tightened. Nothing is worse than seeing kick panels secured so tight, that the kick panels crack or buckle around the fasteners.  That is why we have gone the extra mile to offer kick panels that are significantly stronger than anything that has ever been offered before. Just ask our customers how they feel about their new Rhino Fabrication kick panels.

Color:     Only offered in black, however 60% of our customers choose to spray their new Rhino Fabrication kick panels to match their interior.



These kick panels fit the following vehicles:

  • 1960 Ford Falcon
  • 1960 Ford Ranchero
  • 1960 Mercury Comet


  • 1961 Ford Falcon
  • 1961 Ford Ranchero
  • 1961 Mercury Comet


  • 1962 Ford Falcon
  • 1962 Ford Ranchero
  • 1962 Mercury Comet


  • 1963 Ford Falcon
  • 1963  Ford Ranchero
  • 1963 Mercury Comet


  • Driver Panel:     4 mounting holes
  • Passenger Panel:     4 mounting holes
  • Material:     ABS
  • Thickness:     0.125”
  • Process:     Thermal formed / cnc machined
  • Grain:     Haircell
  • Color:     Only offered in black, however 60% of our customers choose to spray their new Rhino Fabrication kick panels to match their interior.


  • The RF100A is year specific and is trimmed to better fit the contour design of the lower metal dash assembly.  Other manufacturers would lead you to believe that all 1960-1965 Falcon and Comet panels are the same.  Do not believe this!
  • We have done the work to minimize the trimming required by the customer when installing your new panels. Slight trimming is still required at the top of the panels to fit the upper tabs into the wind lace.
  • Rhino Fabrication kick panels are manufactured from heavier material stock to increase rigidity and durability. We want your new kick panels to last for years and years.
  • Lower curved tab added just above the sill plate location. This formed tab helps to minimize the unsightly void between the kick panel and the vertical side wall when panel is mounted.


  • The 1960 model year used completely different mounting hole locations.  These holes were forward on the original 1960  kick panels. At Rhino we have not duplicated these 1960 hole locations into our reproduction panels. All of our panels have the more aft hole locations from 1961-1965, so for those of you with 1960 model year vehicles you will need to drill new mounting holes in your sheet metal sidewall behind the new Rhino kick panels.
  • If you have added sound mat or altered the floor height of your vehicle you may need to trim the lower floor and toe board edges of your panels.
  • The haircell grain exterior finish will accept color change if you decide to match the interior of your vehicle. For best results, visit our ABS Color change page by clicking on the button below. We have provided you with the key elements to achieve success in changing the color of your new kick panels!


You may also like…

CALL RHINO FAB TODAY! Skip to content