The RF500 is the perfect solution to those overheating issues your FE motor may be experiencing. Our reproduction fan shroud is crafted out of 0.187” custom ordered ABS material. The outside and the inside surface of this cooling shroud is a smooth surface with the outer surface being a matte black finish. We believe the shroud for your Fairlane or Comet FE needs to look as great as it performs, and this shroud offers both. Slotted mounting tabs on the RF500 offer some adjustment for aftermarket radiators that may vary somewhat from the stock radiator configuration. For use on the wide 24” radiator only. This is a great fan shroud that will help keep your engine running cool as well as looking cool.

Attention:  These products are very expensive to transport to you. Because we have made every effort to provide you with correct and accurate information concerning fan shroud size, year, and model fitment we will not be responsible for the freight and costs associated with a return of your choosing.  We have excellent photos and descriptions to allow you to purchase the correct shroud for your specific vehicle. We will asses a 20% restocking fee on any returned fan shroud. In short you need to take the time and initiative to be sure you are purchasing the correct shroud. If in doubt call us first.



This fan shroud fits the following vehicles with 24” radiators:

  • 1966 Ford Fairlane
  • 1966 Ford Ranchero
  • 1966 Mercury Comet


  • 1967 Ford Fairlane
  • 1967 Ford Ranchero
  • 1967 Mercury Comet

Note: This shroud will not fit early 1967 Galaxie models.

This fan shroud will only fit the 24″ radiator. If your application has the 20″ radiator, this fan shroud will not fit your vehicle.



This fan shroud will only fit the 24″ radiator. If your application has the 20″ radiator, this fan shroud will not fit your vehicle.

  • Color:     Matte Black Finish
  • Radiator:     24.0”
  • Width side to side:     24.625″
  • Depth front to back:     2.0″
  • Height top to bottom:     19.625″
  • Opening Diameter:     19.625″


Rhino Fabrication fan shrouds are manufactured from material that is smooth inside and outside. The outside of our shrouds have a Matte Black finish and compliment a highly detailed engine bay. The perimeter edges of the cooling shrouds are free of burrs and the trim is precise and professional.


  • If you are sporting an aftermarket radiator the rearward mounting flanges of your radiator may not be exactly as the stock radiator was when it was installed by Ford or Mercury. To correct this mounting issue some of our customers find it necessary to use a vertical flat bar of aluminum to create an offset bracket to mount our shrouds to the aftermarket radiators. Remember, aftermarket radiators are produced to fit multiple models of vehicles.  Our Rhino Fabrication fan shrouds are patterned after the factory shrouds.
  • For best cooling results your fan blades should sit approximately 2/3rds of the distance into the cavity of the fan shroud.

Factors that will affect fitment:

  •  radiator width
  • fan blade diameter
  • engine cubic inch
  • aftermarket pulleys and accessories

Click on our photos and use the info and measurements we provide to determine if the shroud you are ordering will fit your application. If in doubt call us and we will attempt to help you make the determination.

You may also like…

CALL RHINO FAB TODAY! Skip to content